| |
Item |
Description |
|
01-1002 |
Low Profile Centralizer Blade (Bow Spring) |
|
01-1006 |
Collar, Bow Spring, (4 Blade) MWD |
|
01-1098 |
Roll Pin - Spiral (for Bow Spring Collar) |
|
30-1010 |
MWD Fishing Neck (Top); Nitronic 50 HS (Spearpoint with ACME Connection) for Top Shaft |
 |
30-1010-P |
Dowel Pin, 1/4" OD X 1-1/2" Length (for MWD Fishing Neck) |
|
30-1011 |
Top Shaft; BeCu HT (for connection with MWD Fishing Neck) |
|
30-1013 |
Searpoint Assembly; Nitronic 50 HS (Fishing Neck & Top Shaft All-in-one-Part) |
|
30-1015 |
Top Plug Shaft; BeCu HT (Solid Dummy) |
|
30-1020 |
Slip Split Ring Set; BeCu |
|
30-1030 |
Threaded Ring; BeCu HT |
|
30-1031 |
Threaded Ring; Nit 50 HS |
|
30-1040 |
Interconnect Shaft; BeCu HT |
|
30-1040W |
Interconnect Shaft; WIRED |
|
30-1050 |
Interconnect Bushing (1-7/8" OD X 1" Long Solenoid Spacer); Nit 50 |
|
30-1051 |
Interconnect Spacer 2" |
|
30-1060 |
Bumper Sleeve - 1.94" OD |
|
30-1070 |
Spring, Compression |
|
30-1080 |
Washer, MWD; BeCu HT |
|
30-1090 |
Thread Protector (Female for Male Thread); Alum - Red |
|
30-1095 |
Box Protector - (Male for Female Thread); Alum - Red |
|
30-2010 |
Interconnect Housing; BeCu HT |
|
30-2011 |
Interconnect Housing; Nit 50 HS |
|
30-2020 |
Bulkhead Retainer, (Top) 90 Degree Angle; BeCu |
|
30-2025 |
Bulkhead Retainer, (Bottom) 45 Degree Angle; BeCu |
|
30-2030 |
Split Shell Set; BeCu |
|
30-2050 |
Vent Plug (5/16" Hex); Stainless |
 |
30-2051 |
Vent Plug (1/4" Hex); Stainless |
|
30-2052 |
Vent Plug (Slotted); Stainless |
|
30-2070 |
Intermodule End (No Holes); BeCu HT |
|
30-2087 |
Pressure Housing, Solenoid 14.200"; BeCu HT |
|
30-2088 |
Pressure Housing, Gamma 24.000"; BeCu HT |
|
30-2089 |
Pressure Housing, Pulser Driver 30.750"; BeCu HT |
|
30-2090 |
Pressure Housing, Battery 51.850"; BeCu HT |
|
30-2091 |
Pressure Housing, XXT 53.550"; BeCu HT |
|
30-2092 |
Pressure Housing, XXT2 54.000"; BeCu HT |
|
30-2093 |
Pressure Housing, Sensor 62.750"; BeCu HT |
|
30-3070 |
Intermodule End, Battery; BeCu HT |
|
30-4010 |
Intermodule End, Gamma; BeCu HT |
|
30-5020 |
Pressure Bulkhead, OFS; BeCu HT |
|
30-5040 |
Oil Fill Housing; BeCu HT |
|
30-5041 |
Pressure Bulkhead, OFS (All-in-one with Oil Fill Cap); BeCu HT |
|
30-5050 |
Compensator Housing; BeCu HT |
|
30-5060 |
Compensator Membrane Support; BeCu HT |
|
30-5070 |
Screen Housing; BeCu HT |
|
30-5071 |
Screen Housing (with Fluid By-Pass); BeCu HT |
|
30-5075 |
Bellow; HNBR Rubber |
 |
30-5076 |
Bellows Shaft; 3/16" Wide X 4-1/4" Long |
|
30-5080 |
Screen Standard Slotted (for Screen Housing); Stainless |
|
30-5081 |
Screen-Large Slot (for Oil Screen Housing); Stainless |
|
30-5090 |
Piston Cap, 7/8" Hex, Nitronic 50 HS |
|
30-5091 |
Piston Cap, with Venting Slots; Nit 50 HS |
|
30-5092 |
Piston Cap, with Wrench Flats; BeCu |
|
30-5093 |
Piston Cap, with T-Seal Slot; Nit 50 HS |
|
30-5094 |
Piston Cap, 4 Poly Pak Style; 17-4 HT |
|
30-5095 |
Spring, Main (MWD) |
|
30-5100 |
Signal Valve Shaft; 17-4 HT |
|
30-5110 |
Pulser Helix, (Standard); 17-4 HT |
|
30-5110C |
Pulser Helix, (With Wrench Flats); 17-4 HT |
|
30-5111 |
Pulser Helix, (Old Style); 17-4 HT |
|
30-5120 |
Oil Fill Plug (Hex); Nitronic 50 |
|
30-5130 |
Abrasion Ring (Small) 1.875"; 17-4 HT |
|
30-5140 |
Abrasion Ring (Large) 2.125"; 17-4 HT |
 |
30-5141 |
Abrasion Ring; 17-4 HT & HNBR Rubber |
|
30-5150 |
Poppet Housing (3" Bore); BeCu HT |
|
30-5151 |
Poppet Housing (2" Bore); BeCu HT |
|
30-5155 |
Internal Ram Stop; 17-4 HT |
|
30-5156 |
External Ram Stop; Stainless |
|
30-5157 |
Solenoid Spacer |
|
30-5200 |
Oil Fill Station End caps; Aluminum (Set) |
|
30-6010 |
Wear Cuff; 17-4 HT |
|
30-6011 |
Wear Cuff (Old Style); 17-4 HT |
|
30-6030 |
Muleshoe Key, (Small) for 3-1/2" Sleeve; 17-4 HT |
|
30-6031 |
Muleshoe Key, (Medium) for 4-3/4" Sleeve; 17-4 HT |
|
30-6032 |
Muleshoe Key, (Large) for 6-1/2" Sleeve; 17-4 HT |
|
30-6035 |
Bottom Sleeve; 17-4HT |
|
30-6040 |
Small Mule Shoe Assembly 3-1/2" (Includes Old Style Wear Cuff, Key & Retainer Rings) |
 |
30-6050 |
Medium Mule Shoe Assembly 4-3/4" (Includes Wear Cuff, Key, Bottom Sleeve, Retainer Rings & Set Screws) |
 |
30-6060 |
Large Mule Shoe Assembly 6-1/2" (Includes Wear Cuff, Key, Bottom Sleeve, Retainer Rings & Set Screws) |
|
30-6211 |
Retainer Ring - LARGE |
|
30-6213 |
Retainer Ring - MEDIUM |
|
30-6215 |
Retainer Ring - SMALL |
|
30-6300 |
Rubber Fin - 13" |
 |
30-6310 |
Rubber Fin Assembly (3-1/4" Fin) |
|
30-6360 |
Cable End 0 Degree; Aluminum - Red |
|
30-6361 |
Cable End 45 Degree; Aluminum - Red |
|
30-6362 |
Cable End 90 Degree; Aluminum - Red |
|
30-7302 |
Transducer Protector - Aluminum |
|
30-7303 |
Transducer Protector Adapter - 1/2" NPT; 17-4 HT |
|
30-7304 |
Transducer Protector Adapter - 1/4" NPT; 17-4 HT |
 |
30-7305 |
Transducer Protector Adapter - 7/16-20; NPT; 17-4 HT |
|
30-7400 |
Snubber Assembly, Gamma (Less Rubber Insert) |
|
30-7401 |
Snubber Assembly, Battery (Less Rubber Insert) |
|
30-7402 |
Snubber Assembly, Directional (Less Rubber Insert) |
 |
30-7403 |
Snubber Assembly, Pulse Driver(Less Rubber Insert) |
|
30-7450 |
Bushing BeCu (for Directional Chassis & Snubbers) |
|
30-7451 |
Pin; BeCu (for Directional Chassis & Snubbers) |
|
30-7485 |
Directional Chassis (Strong Back); Anodized Aluminum) |
|
|
|
|
|
|
