Hi-Flo Rod Screen-Open Top 2' Retrievable
(rod type)
Tool Joint |
Part # |
Description |
4-1/2” API IF |
SS-200-360 OT SS-200-370 FN |
17-4 Stainless
2’ long 1/4” Rods |
4-1/2” X-Hole |
SS-200-520 |
17-4 Stainless
2’ long 1/4” Rods |
4” API FH |
SS-200-260 |
17-4 Stainless
2’ long 1/4” Rods |
3-1/2” API IF
or X-Hole |
SS-200-240 |
17-4 Stainless
2’ long 1/4” Rods |
Features
• High Flow (Rod Type) retrievable drill Pipe Screens are manufactured from 17-4 Stainless Steel.
• The top of the screen is open, allowing drilling mud to pass through freely with a minimum of washing problems.
• The rod diameter of the screen is 1/4” for maximum strength.
• The screen has two heavy duty middle support rings to prevent bulging due to high drilling pressures encountered downhole.
• The inner ring has 12 blind holes and an O-ring to help prevent wash out due to flow.
|
• Retrievable tool shown is necessary to extract screen from the hole if left in the pipe or if the Kelly becomes stuck down. |
|
• The screen can also be equipped with a Standard or Pee Wee Fishing Neck. |
PDF
