3 ft. Retrievable Mud Screen-
Perforated 11 Gauge
Tool Joint |
Part Number |
Description |
6-5/8” FH |
SS-200-500A |
Heavy Duty 11-gauge
3’ long 3/16” holes |
5-1/2” API FH |
SS-200-520 |
Heavy Duty 11-gauge
3’ long 3/16” holes |
4-1/2” API IF |
SS-200-260 |
Heavy Duty 11-gauge
3’ long 3/16” holes |
4-1/2 ” X-Hole |
SS-200-240 |
Heavy Duty 11-gauge
3’ long 3/16” holes oles |
4 ” API FH |
SS-200-220 |
Heavy Duty 11-gauge
3’ long 3/16” holes |
2-7/8” API IF
or AOH |
SS-200-200 |
Heavy Duty 11-gauge
3’ long 3/16” holes |
3-1/2” API IF
or X-Hole |
SS-200-210 |
Heavy Duty 11-gauge
3’ long 3/16” holes |
Features
• Perforated screens are made out of heavy duty Stainless 11 gauge T-304 Stainless. Screens can also be made out of 3/16” thick T-304 Stainless.
• Unless specified otherwise on order, fishing neck size will be standard Reed Type A.
• Perforated screen has 3/16” holes on 5/16” centers. Hole sizes from 1/8” to 1/2” are also available.
• Screens from 10” to 48” long are available.
• Screens are also available in non-retrievable sizes.
• Simple rig handling by use of a permanently connected handle. Various flanges are interchangeable with the basket to fit the required pipe. Flange has tool joint identification stamped on top.
• May be used in the Kelly or drill pipe connection. Provides emergency retrieval with a standard overshot if accidentally left in the pipe or if the Kelly becomes stuck down. Shear pins may easily be replaced.
PDF
